AOR AR8200 Spezifikationen PDF herunterladen (Seite 75)

To assist testing in the factory, several search banks may be programmed with data (which can be easy

deleted or over-written). This pre-programming is useful to ease familiarisation during the early days of

operation… so that when you push a key there is something already programmed to work!

8-2 Starting program search

Presuming that data is already stored into a search bank…

the key to start the program search

process. The LCD legend “SRCH” will be displayed and as

long as the squelch is closed, the search process will start

from the lower frequency limit and will progress toward the

upper frequency limit. When the program limit is reached,

the search loops around and starts the process again.

&Note: If no search banks have been

programmed, the search process will not operate.

8-2-1 Reversing the

direction of search

To reverse the direction of

search use the main dial

or ñ ò keys, this is useful

to enable you to search

back over and over an

interesting point of the

search process.

8-2-2 Forcing the search to resume

If the AR8200 stops on an unwanted busy frequency, the key or use the ñ ò keys or

main dial to force the search process to resume from the current frequency displayed.

8-2-3 Stopping the search

While the search process is in progress (not stopped), to stop searching and transfer

the current frequency to the single VFO for monitoring or tuning from. To exit the search process

the key for memory read mode or the key for 2VFO mode (displaying the

data on-screen before search was started).

Section 8-1-1, 8-2, 8-2-1, 8-2-2, 8-2-3

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 141 142

Keine Kommentare

AOR AR8200 Spezifikationen Seite 75