AOR AR2000 Bedienungsanleitung PDF herunterladen (Seite 77)

AR1000 Reference

SEARCH button, you will still search in the normal upwards manner. If you

want to continue to search downwards, keep pressing the Down arrow button.

Using the Down arrow while scanning

The Down arrow works in a similar manner while scanning as it does while

searching. If you are scanning, pressing the Down arrow button stops the scanner

at the current channel, but keeps it in scan mode. The successive presses of the

Down arrow button will step you backwards through the scan channels. If you

press and hold the Down arrow button for a moment, the scanner will start

scanning backwards through the available scan channels. As with searching, this

does not set up a “mode.” If you want to keep scanning backwards, keep using

the Down arrow. When you press the normal SCAN button, you will always

scan from lower to higher channels.

Tip:

In Manual mode, you can use the MANUAL button to step forward through

each Scan channel, but there is no equivalent method of stepping backwards

through the channels. You can use the Down arrow button to make the scanner

act in this manner. The difference is that, because you are still in Scan mode,

when you step with the Down arrow, you will skip over every locked channel. In

addition, you will only be able to step through unlocked scan banks. In Manual

mode, you can step through every bank in the scanner (as long as it has not been

limited with bank limiting). Even if the bank itself is locked, the MANUAL

button will let you step through it. When you use the Down arrow, you can only

step through the banks (and the channels) that are unlocked.

Using the Down arrow in Manual mode

When you are in Manual mode, you will be looking at one scan channel. You

can temporarily change the frequency of that channel by pressing the Down

arrow. The scanner will decrement the current frequency by the default incre-

ment value of 12.5 KHz. You can change this default by pressing the INC

button and entering in a different increment value. For example, if Manual mode

stops you on channel 212, which contains the frequency 460.500 MHz, and you

press the Down arrow, the frequency in channel 212 will change to 460.4875

MHz. If you first changed the increment value to 10 KHz, by pressing INC, 10,

ENT, then when you press the Down arrow, the frequency in channel 212 will

read 460.490 MHz. The Down arrow, in this case, is equivalent to turning the

Tuning knob one click to the left (counter-clockwise). Turning the knob to the

right (clockwise) will increment the frequency by the increment amount. There is

no keyboard equivalent to turning the Tuning knob to the right.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 90 91

Keine Kommentare

AOR AR2000 Bedienungsanleitung Seite 77