AOR AR7000 Bedienungsanleitung PDF herunterladen (Seite 10)

NOTE: 9600 baud is being used, not the factory default

1200 baud. As such, the CI-V Baud Rate diode, D2 must be

in place and D3 must be empty. Also diode D4, the factory

default, must be in place for standard 5 byte frequency data.

IC726 RELEASED

CAT PTT

QS/S

CPP - 9600, 8N1

Radio does not support CAT PTT

NOTE: Factory addressing is used, WRT address diodes

D57-D63, only D61 and D62 should be in place for the

factory address of 30h. Diode D64 for transceive operation

should no be installed either.

NOTE: 9600 baud is being used, not the factory default

1200 baud. As such, the CI-V Baud Rate diode, D2 must be

in place and D3 must be empty. Also diode D4, the factory

default, must be in place for standard 5 byte frequency data.

IC728 RELEASED

QS/S

CAT PTT

CPP - 9600, 8N1

Radio does not support CAT PTT. Also use for IC-77.

NOTE: Factory addressing is used, WRT address diodes

D57-D63, only D60, D61 and D62 should be in place for the

factory address of 38h. Diode D64 for transceive operation

should no be installed either.

NOTE: 9600 baud is being used, not the factory default

1200 baud. As such, the CI-V Baud Rate diode, D2 must be

in place and D3 must be empty. Also diode D4, the factory

default, must be in place for standard 5 byte frequency data.

IC729 RELEASED

CAT PTT

QS/S

CPP - 9600, 8N1

Radio does not support CAT PTT

NOTE: Factory addressing is used, WRT address diodes

D57-D63, only D58, D60, D61 and D62 should be in place

for the factory address of 3Ah. Diode D64 for transceive

operation should no be installed either.

NOTE: 9600 baud is being used, not the factory default

1200 baud. As such, the CI-V Baud Rate diode, D2 must be

in place and D3 must be empty. Also diode D4, the factory

default, must be in place for standard 5 byte frequency data.

IC735 RELEASED

CAT PTT

QS/S

CPP - 9600, 8N1

Radio does not support CAT PTT.

The IC-735 is factory set to 1200 baud. It is however

recommended that the J22 settings be changed for 9600 baud

operation where the first two position set the baud rate where

1 is ON and 2 is OFF. To change the baud rate from 1200 to

9600 you need to remove the PA heat sink.

IC736 RELEASED

CAT PTT

QS/S

Radio does not support CAT PTT

IC737 RELEASED

CAT PTT

QS/S

Radio does not support CAT PTT. Also use for IC-737A

IC738 RELEASED

CAT PTT

Radio does not support CAT PTT

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

AOR AR7000 Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Empfänger AOR AR7000