
12. Antenna connector (N type)
13. Standard signal (10 MHz) input connector
14. IF output connector
15. Main power switch
16. DC power input connector
17. Remote control connector (RS-232C) -- 1
18. Remote control connector (RS-232C) – 2
19. External signal output connector (when used, the internal speaker is disabled.)
20. Audio output connector (speaker output without disabling the internal
speaker.)
21. Signal output connector (0 – 4.5 V DC maximum)
RS-232C connection requirements:
The REMOTE RS-232C connector (16 & 17 above) is designed for connection directly to
an
RS-232C serial port of a PC. By daisy chain of the units, you can control up to 99 AR-ONE
with one PC. No interface is required, just a standard RS-232C straight cable. Connections
for a PC are as follows:
AR-ONE DB-9 RS-232C cable DB-25 RS-232C cable
Pin # 2 Pin # 2 Pin # 3
Pin # 3 Pin # 3 Pin # 2
Pin # 5 Pin # 5 (Ground) Pin # 7 (Ground)
Pin # 7 Pin # 7 Pin # 4
Pin # 8 Pin # 8 Pin # 5
Kommentare zu diesen Handbüchern